Registering A Destination; Programming A One-Touch Dial Button - Konica Minolta bizhub 200 User Manual

Scan to PC operations
3.7

Registering a destination

Programming a one-touch dial button

If a recipient is registered with a one-touch dial button, the transmission can
be sent easily and accurately.
Two types of recipients can be registered with a one-touch dial button: a
main recipient and a secondary recipient, where the data is sent if the trans-
mission to the main recipient fails.
Note
If the "Restrict One-Touch Editing" parameter on the Administrator Set
screen (displayed from the Administrator Management screen) is set to
"ON", only the administrator will be able to register, change and delete
one-touch recipients. For details on the Administrator Set screen, refer to
the User's Guide [Facsimile Operations].
!
Detail
Any of the following communication modes can be specified for the sec-
ondary recipient.
- PC (E-Mail)
- PC (Scanner)
- InternetFAX (Internet FAX)
- InternetFAX (IP-TX)
- InternetFAX (IP Relay)
- FAX (G3)*
* The communication mode can be specified if the optional fax kit is in-
stalled.
Settings can be specified for the following.
Item
One-Touch Name
Destination
Port
File Type
Coding Method
200/250/350
Description
Type in the name of the recipient that will appear on the one-
touch dial button. Up to 12 characters can be entered.
Example: Tokyo br
Type in the IP address of the computer where the data is to
be saved.
Type in the port number (between 1 and 65535).
Select the format ("TIFF" or "PDF") of the file that is to be sent.
Select the coding method for the data to be sent. Select "MH"
or "MMR". The data amount with the MMR coding method is
less than with the MH method.
3
3-31