Interrupt Copying - Konica Minolta 8050 Instruction Manual

Interrupt Copying

Use the Interrupt mode to interrupt copying in progress to perform a simple job.
Whe n interrupt copying is complete d, the settings for the initial job restore
automatically and the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory in Reserve mode while printing
If desired, Key Operator can change the timing to stop current machine
operation for interrupt copying.
Note that the compatible copying conditions vary according to the timing
selected. See p. 14-37 to p. 14-42.
Specification for Interrupt Mode
❒ The Interrupt mode cannot be selected with the following copier conditions:
The Basic Screen is not displayed.
Overlay Memory is in use.
The Call for Service message displays or a paper misfeed occurs.
❒ Incompatible: 2 1, 2 2, Applications, Mixed Original, Z-Folded Original
1.
Press [INTERRUPT] on the control panel.
The [INTERRUPT] LED turns on and all JOB indicators on the Basic
Screen change to INTERRUPT.
The timing to enter the Interrupt mode varies according to the job in progress
on the machine when [INTERRUPT] is pressed.
See the following page.
4-8