Table of Contents
Advertisement
Transmitting/Editing Machine Setting File (continued)
DETAILS: To Edit the Machine Setting File
• Save the file as a text.
• Begin the file with a specified tag. (ex. #EKC_TAB)
• A line should be 300 bytes or less.
• The file size should be 100,000 bytes or less.
• The line that begins with "#" is a comment.
ex. Machine setting file of an E.K.C. data
DETAILS: Specifications for Each Machine Setting File Type
E.K.C. data setting file:
• Begin the file with #EKC_TAB.
• Max. 1,000 files can be edited.
• A line should include PASSWORD, NAME, and LIMIT, separated by a tab.
• Use up to 8 digits numbers (0 - 9) only to specify PASSWORD.
• Use numbers, alphabets (capital letters only), and four symbols: (, ), -, and
/ only to specify NAME.
• Use up to 6 digits numbers (0 - 9) only to specify LIMIT (0 - 999,999).
E-mail data setting file:
• Begin the file with #IP_EMAIL.
• Max. 96 files can be edited.
• A line should include ENTRY NAME and E-MAIL ADDRESS, being
separated by a tab.
• ENTRY NAME should be 18 bytes or less.
• E-MAIL ADDRESS should be 60 bytes or less.
HDD data setting file:
• Begin the file name with #IP_HDD.
• Max. 48 files can be edited.
• A line should include ENTRY NAME and BOX NUMBER, being separated
by a tab.
• ENTRY NAME should be 18 bytes or less.
• Use up to 4 digits numbers (0 - 9) only to specify a BOX NUMBER.
11-27
Advertisement
Table of Contents
Troubleshooting
