Copying Using Special Paper (Multi-Sheet Bypass Tray) - Konica Minolta 8050 Instruction Manual

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Use the Multi-sheet bypass tray to copy using special (non-standard) paper.
Select the special paper type and weight from the selections previously specified by
the Key Operator, then select the size to be loaded on the Multi-sheet bypass tray,
as described below.
Tr anspar ency cannot be used on t hi s machine. D O NO T load the
transparencies into the Multi-sheet bypass tray.
8.5"x11"R and B6R sizes (unavailable in Tray 1 to 4) can be used in the Multi-
sheet bypass tray. Also, 210~256 g/m
bypass tray.
• To specify the combinations of special paper type and weight to be
selected for the Multi-sheet bypass tray, see p. 14-23.
• To specify the special paper type, weight and size in Tray 1 to 4 to be used
on a regular basis, see p. 14-21 to p. 14-22.
1.
Open the Multi-sheet bypass tray, and load the copy paper.
See p. 2-26 for further details of loading procedure.
For the specifications of paper in the Multi-sheet bypass tray, see p. 12-2 to p.
12-8.
2.
Touch the Multi-sheet bypass tray key in the PAPER SIZE area of
the Basic Screen to highlight it.
The TYPE/SIZE key will appear under the bypass tray key, APS will be
deselected, and AMS will be highlighted on the Basic Screen.
3.
Touch TYPE/SIZE.
The Paper Type/Size popup menu will be displayed.
3-18
2
paper can be used in the Multi-sheet