Konica Minolta 8050 Instruction Manual page 11

Features of the Konica 8050
AE - Automatic Exposure
Automatically adjusts exposure to compensate for quality of the original.
AMS - Automatic Magnification Selection
Automatically selects an appropriate magnification ratio when Paper Size is selected
manually. Automatically selected when the AMS key is touched.
APS - Automatic Paper Selection
Automatically selects copy paper size to match the original documents.
ATS - Automatic Tray Switching
Automatically switches tray to allow copying to continue without interruption if the
selected tray empties while copying is in progress.
Auto Layout
The original image on the platen glass or in the document feeder is copied and
centred on a sheet.
Auto Low Power
Automatically lowers the power after a specified period of copier inactivity.
Auto Reset
Automatically resets to auto mode defaults after a specified period of copier
inactivity.
Auto Shut-Off
Automatically shuts off the main power after a specified period of copier inactivity.
Booklet
Creates a multiple page signature booklet copied on both sides of paper in 1 2 or
2 2 copy mode.
Chapter
Starts chapter pages on the right side (front pages) of the finished document. Only
duplex mode (1 2) is compatible with this feature.
Colour Mode
Copies full-coloured originals or makes single-coloured copies, and also adjusts
image quality of the copies.
Combination
Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to create a
draft copy of a multi-page report at the same time as saving paper.
Copy Density
Manually selects up to 9 density levels.
Copy Mode
Selects the desired simplex mode (1 1 or 2 1); or duplex mode (1 2 or 2 2).
Counter List
Displays on the screen and prints the following data: total counter of the machine,
copier counter, print counter and the date when the counter started.
ix