Table of Contents
Advertisement
3 Specify paper type and weight.
(1) Touch the desired tray key to highlight it.
(2) Touch the desired paper type and weight keys to highlight them. The selected
paper type and number indicating the paper weight will appear on the tray
key.
4 Specify special size.
(1) Touch Special size setting on the Paper Type Setting Screen to display the
Special Size Setting Screen.
(2) Touch the desired tray key to highlight it.
(3) Touch a paper size key to specify a paper size for the selected tray.
• Select STD size to allow the machine to automatically detect the size of
paper loaded in the tray and indicate it on the tray key.
• Select STD size (special) to display the popup menu to show available
paper sizes to be specified. Use arrow keys on the popup menu to select
the desired size.
• Select Non STD size to display the popup menu to enter the paper size by
using arrow keys or touch screen keypad. The selected tray key will
indicate "SPECIAL" instead of the entered numeric value.
• Select Wide size paper to display the popup menu to show available wide
paper sizes to be specified. Use arrow keys on the popup menu to select
the desired wide size. Touch Lead edge or Rear edge to select the image
starting position.
Then, touch Input size to display the popup menu to enter the actual paper
size using arrow keys or touch screen keypad. The entered number should
fall within the range from the standard size of the selected wide size, to a
maximum of 330 mm x 487 mm.
NOTE:
When selecting Wide size paper, be sure to input the actual paper size to be
used.
5 Touch OK on the Special Size Setting Screen to complete the setting and return
to the Paper Type / Special Size Setting Menu Screen, or touch CANCEL to
restore the previous setting.
6 Touch PREVIOUS SCREEN to return to the Key Operator Mode Screen.
14-22
[6] Paper Type / Special Size Set (continued)
Advertisement
Table of Contents
Troubleshooting
