Table of Contents
Advertisement
If the copy result is satisfactory, proceed to step 5.
If any setting changes are required, refer to p. 4-6 under the next heading.
4.
Repeat proof copying until the copy result becomes satisfactory.
5.
Change the print quantity, as required.
Proof copy can be performed as needed, until the print quantity amount on the
Basic Screen reaches zero.
If required, change the print quantity on the Basic Screen.
6.
Press [START].
If the print quantity is not changed, the copier will output the rest, minus the
sample sets.
Wh en the fin isher / tr immer un it / paper exi t t ray capac ity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
Making Sample Copy (Proof Copy) (continued)
4-3
Advertisement
Table of Contents
Troubleshooting
