Table of Contents
Advertisement
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
3.
Touch MANUAL, then specify the vertical and horizontal widths of
the scanning area.
Use up/down arrow key to enter the width from 10 to 150 mm in 1 mm
increments. Keep touching the key to increase/decrease the value
continuously.
Or, touch ENTER REPEAT WIDTH USING KEYPAD to display the popup
menu to enter the value from the touch screen keypad.
Touch VERTI. WIDTH or HORIZ. WIDTH, enter the value for each, then
touch OK to restore the Repeat Mode Selection Screen.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.000 (100%) is selected as
a magnification ratio.
• Copy mode is automatically set to 1 1. If 1 2 is selected, Platen store
mode will function automatically.
10-35
Advertisement
Table of Contents
Troubleshooting
