4.
Position original(s) after completing the scan for the current job.
See p. 3-4 to p. 3-9 for details on positioning originals.
To cancel the reserve job, touch STATUS on the Basic Screen to display the
Job Status Screen. See p. 3-38 to p. 3-40 for details.
5.
Press [START] to start scanning for the reserve job.
Up to 8 jobs (current job included) can be set.
When setting more than one reserve job, the next reserve job setting will be
available after the copier starts to scan for the previous reserve job.
To set the fourth copying job, touch the active FREE JOB key at the far
right to scroll to the next reserve setting screen. Another three reserve job
settings (04-06) will be available.
3-36
To Set Next Copying Job (Reserve) (continued)