Table of Contents
Advertisement
Secondary (Sub) Tray:
1 Face down non-sort exit outputs simplex copies and odd numbered duplex
copies face down, without offsetting the sorted sets.
2 Face down group exit outputs multiple copies of each original face down,
without offsetting the grouped sets upon exit.
3 Face up non-sort exit outputs simplex copies and odd numbered duplex copies
face up, without offsetting the sorted sets.
4 Face up group exit outputs multiple copies of each original face up, without
offsetting the grouped sets upon exit.
Face down
non-sort
The copier is initially set to output to Primary (main) tray in Sort mode.
Follow the procedure on the next page to change the output mode, as desired.
See Section 8 for the output modes using Finisher options.
Specification for Output Modes with Finisher
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Fold, Stitch & Fold, Three-Fold,
Trimming,
❒ Incompatible with Staple mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Fold, Stitch & Fold, Three-Fold, Trimming
Using excessively curled paper or some types of thin paper in Staple mode
may cause poor results in arrangement of the stapled sets.
❒ Incompatible with Group mode: 1 2 or 2 2 mode using platen glass (unless
Platen store mode is used), Proof Copy, Fold, Stitch & Fold, Three-Fold,
Trimming, Sheet/Cover Insertion, Chapter, Combination, Booklet, Image
Insert, Repeat
3-46
Output Mode for Machine with Finisher (continued)
Face down
group
3
2
1
Example:
Make 3 copied sets
Face up
non-sort
Face up
group
Advertisement
Table of Contents
Troubleshooting
