Konica Minolta 8050 Instruction Manual page 248

Dividing an Image into Right and Left Pages (Dual Page) (continued)
7.
Select the desired copy mode and magnification.
• Available paper size is A4.
• When selecting Facing pages mode and scanning from the platen glass,
select 1-1 or 1-2 copy mode.
• APS and AMS are released and 1.000 magnification is selected automatically.
Change the magnification manually, if desired.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with
document feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/
Back Cover + Facing pages mode, see the description on the following
page.
10.
Press [START] to scan.
11.
Repeat steps 9 and 10 for all originals.
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the document feeder throughout the scanning job.
12.
Touch STORE to exit the Store mode.
13.
Press [START].
The copier will start printing when ready for output.
When the finisher / paper exit tray capacity is exceeded due to the
p rint quan tity selec ted, remove the co pied sets as they exit;
otherwise, mishandled paper will occur.
10-22