Konica Minolta 8050 Instruction Manual page 68

Hide thumbs Also See for 8050:
Table of Contents

Advertisement

Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
• To use the Mixed original mode, see procedure on p. 9-6 to p. 9-7.
• See p. 12-10 for available combinations of mixed originals.
1.
Arrange originals in order.
Arrange the mixed size originals as illustrated below.
2.
Position mixed originals FACE UP, aligned with the left rear side of
the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
• Be sure not to use unsuitable RADF originals. See p. 12-9 for details.
• Do not set more than 100 originals or over the limit indicated on the paper
guides; otherwise a paper misfeed will occur to cause damage to the
originals.
Before placing originals in the tray, be sure the document feeder is closed
fully. Once closed, do not open the document feeder, otherwise the selected
copy conditions may be altered automatically.
3.
Adjust paper guides.
3-6
Positioning Originals (continued)
To the
To the left
depth
Setting
direction

Advertisement

Table of Contents
loading

Table of Contents