Entering Commands; Key-In Conventions; Guide Command Conventions - Xerox DocuPrint 96 Operator's Manual

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS

Entering commands

Key-in conventions

Guide command conventions

1-18
Follow these conventions when entering commands:
•
The system is ready to receive commands when this message
appears in the Messages window:
OS1000 READY FOR COMMANDS
•
All commands may be abbreviated to the first three characters
or spelled out fully and correctly.
•
Commands are executed by pressing <ENTER>, except for
those entered with the function keys.
•
Spaces or commas may be used to separate command
parameters.
•
Error and information messages from the system are preceded
by OS and a four-digit code indicating the severity level. Refer
to the Xerox DocuPrint 96/DocuPrint 96MX LPS Message
Guide for information on a particular error message.
•
A message acknowledging your request appears as positive
feedback to you. An error message appears when a command
is entered incorrectly:
OS2710 INVALID COMMAND, PLEASE REENTER
When command instructions are given in this guide, the following
conventions apply:
•
Capital letters represent command keywords, the required part
of the command.
•
Lowercase letters, appearing in italics, represent data that
changes each time you use the command. For example, the
number of copies and the name of a form can vary for each job.
•
Characters enclosed in square brackets ([ ]) are optional. You
key them in only when you need them. For example, when you
see [copies] in a command and you do not key in a specific
number, the system automatically prints one copy.
•
Characters enclosed in curly braces ({ }) are required.
•
Options are separated by a vertical line (|).
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE