Turning MICR mode on or off
MICR mode echo
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
The Xerox DocuPrint 96MX LPS may run in MICR or non-MICR
mode. This gives you control of the printer MICR state. To perform
the mode selection, enter the following command at the System
Controller terminal:
MICR [ON/OFF]
The MICR mode echo is an icon on the desktop header (see figure
12-2). It indicates the state of the printer's MICR mode status.
Figure 12-2. MICR mode echo icon
MICR OPERATING PROCEDURES
12-3