Xerox DocuPrint 96 Operator's Manual page 60

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS
Printer control console
1-10
The printer control console, shown in figure 1-10, is a color monitor
located on top of the printer. It contains message areas and graphic
displays that alert you to paper jams and other fault and status
conditions (such as low dry ink). It also contains buttons which allow
you to control certain functions of the printer (for example, continuing
an interrupted job) without returning to the keyboard display. The
printer control console has the following features:
•
Local controls and displays for jam clearance, paper loading/
unloading, and diagnostics/service (used by the service
representative). Two types of messages are displayed on the
printer control console: fault messages, which relate to printer
malfunctions, and information messages, which relate to printer
conditions such as low dry ink.
•
Touch-sensitive areas that allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
•
Printer alarm consisting of sets of three beeps, for a duration of
ten seconds. This tone is generated by any event that stops
printer operation (for example, a paper jam).
You can deactivate the alarm through the keyboard display
(refer to the "System control tasks" chapter for instructions).
The tone stops after three cycles, or when the fault condition is
cleared or clearing has started (for example, doors or covers
specified in the clearance instructions are opened). You can
also stop the tone by pressing one of the printer control console
buttons or by selecting a function through the touch screen.
•
To prevent monitor burnout a screen saver feature
automatically blanks the screen.
To return to the screen press any key.
Figure 1-10. Printer control console
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE