Xerox DocuPrint 96 Operator's Manual page 150

JOB CONTROL TASKS
Job control tasks
Abort
4-2
You can activate job control tasks by entering commands through the
keyboard
The following sections contain instructions for performing specific job
control tasks.
Use this task to do one of the following:
•
Remove a specific print job from the system
•
Remove the print job currently being processed
•
Cause the current print job to stop printing (printing continues
with the next report)
•
Cause the currently active nonprint task (such as FDL or PDL)
to abort (there must be no active print jobs when this command
is entered).
Abort task To remove a specific print job from the system, enter the following
command:
ABORT job-id
Table 4-1 lists the parameter and its description.
Table 4-1.
Parameter
job-id
To cause the current job to stop printing, enter the following
command:
ABORT O
To remove the print job currently being input into the system, enter
the following command:
ABORT I
To abort a nonprint task (such as FDL or PDL), enter the following
command:
ABORT
For this command to work, there must be no print jobs active at the
time it is entered. If there is an active print job, the following message
appears:
OS1190 INVALID PARAMETER, COMMAND IGNORED
ABORT command parameter and description
Description
The name of the job you want to abort.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE