Unload an open-reel tape during a power failure
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Then the following happens:
•
The tape rewinds through beginning of tape (BOT).
•
The tape reel is unclamped.
•
The tape door opens.
•
"OK" appears on the tape drive message display.
Step 2.
Remove the tape.
If power to the open-reel tape drive is cut off and you must unload the
tape reel before power is restored, follow this procedure.
Step 1.
Press the Power switch to the OFF position by pressing down the
side marked 0 (see figure 6-14).
Warning: This is essential for safety reasons.
!
Figure 6-14. Power switch
OFFLINE PRINTING TASKS
6-9