Xerox DocuPrint 96 Operator's Manual page 238

HIP PRINTING TASKS
Place HIP online
Place HIP Online task
Take HIP offline
Take HIP Offline task
7-4
Use this task to place the LPS online to the host.
Enter the following command:
HIP ONLINE [ALL]
The ALL parameter specifies that both print and nonprint files are
accepted. The default is that only print files are accepted. As print
jobs are received, they are entered into HIP's internal job queue and
become eligible for submission to Operator Communications
Subsystem (OCS) for printing. One of the following messages
appears:
HP1210 HOST ONLINE. ACCEPTING ALL JOBS
HP1220 HOST ONLINE. ACCEPTING PRINT JOBS ONLY
HP2010 NO HOST SELECTED
HP2030 ALL NOT ALLOWED AT CURRENT LOGON LEVEL
HP0200 FAILED TO GO ONLINE
Note: ONLINE ALL is accepted in logon level class 2 and above for
all hosts except for XNS hosts. HIP is always in ONLINE ALL mode
for the XNS hosts.
If the selected host is not online and responding, the following
message appears every 30 seconds until the host comes online or
the online request is terminated by the HIP OFFLINE command:
HP1240 HOST NOT RESPONDING
Use this task to take HIP offline. The LPS no longer accepts jobs from
the host.
Enter the following command:
HIP OFFLINE
The system's response is delayed to the end of the current file if a file
is being transmitted. The following messages appear:
HP1200 OFFLINE PENDING END OF TRANSMISSION
HP1207 OFFLINE PENDING END OF CURRENT ACTIVE XNS
SESSION
HP1230 HOST OFFLINE
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE