Clearing A Misfeed (Feeder Tray Fault) - Xerox DocuPrint 96 Operator's Manual

PROBLEM SOLVING TASKS

Clearing a misfeed (feeder tray fault)

11-22
To clear a misfeed:
Step 1. Go to the feeder tray indicated by the message and display on the
printer control console.
Step 2. If the Ready to Open indicator is not lit, press the Tray Unlock button
located on the feeder tray control panel (see figure 11-27).
Figure 11-27.Tray Unlock button
Step 3. When the Ready to Open indicator lights, open the feeder tray. Pull
the tray all the way out for best results.
Step 4. For the processor feeder trays, press the green lever to unlatch the
paper feeder assembly (see figure 11-28).
Figure 11-28.Unlatching the paper feeder assembly
Step 5. Remove and discard any partially fed paper. Ensure that:
•
The paper supply is neatly stacked
•
The stack is not higher than the MAX line on the length guide
•
The length guide is firmly touching the back edge of the stack.
•
For the high-capacity feeder trays, also ensure the side guide is
firmly touching the side of the stack.
Note: You do not need to discard transparencies and other
stiff materials unless they are damaged.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE