Floppy Disk Drive - Xerox DocuPrint 96 Operator's Manual

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS
Message display

Floppy disk drive

1-16
Mode button Switches modes of the tape drive, displaying menu selections and
assigning alternate functions to the buttons described above. This
button only functions when the tape unit is not ready.
The front panel also contains the following three indicator lights:
Read only Is illuminated if the installed cartridge is write protected.
Ready Is illuminated when a cartridge is loaded and the tape drive is online
to the system controller.
Mode Is illuminated when the alternate mode has been selected.
Note: If all three indicators lights are flashing, a problem has
occurred and operator intervention is required.
Displays tape drive messages, menus, and error codes. Messages
such as LOADING, BOT, REWIND, CLEAN, are displayed to show
status. Other messages such as CST indicating a standard length
cassette, ECCST indicating an extended length cassette, or
CLEANING indicating a cleaning cartridge are also displayed. The
message display will also show a small flashing square in the
rightmost character space to indicate tape unit interface activity
When installed, the optional floppy disk drive is located in the system
controller, to the right of the 1/4 inch cartridge tape drive. It allows you
to transfer files between a floppy disk and the system controller's
hard disk.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE