Energy Saver Mode; Entering The Energy Saver Mode - Xerox Wide Format 6705 System User Manual

1.3
The machine is equipped with an Energy Saver feature that reduces the power consumption of the machine if no
copy or print data is received for a certain duration.
The Energy Saver feature has two modes: Low Power mode and Sleep mode.
1
If the machine is left unused for a preset period of time, the machine enters the Low Power mode.
The machine then enters the Sleep mode if a further preset time elapses.
To enable the Energy Saver feature, press the <Energy Save> button on the control panel.
Low Power Mode
In this mode, the power to the control panel and print engine is lowered to save power.
The touch screen goes out, and the <Energy Save> button on the control panel lights up. To use the machine, press
the <Energy Save> button. The <Energy Save> button goes out to indicate that the Low Power mode is exited.
Sleep Mode
In this mode, the power is lowered even more than in the Low Power mode.
The touch screen goes out, and the <Energy Save> button on the control panel lights up. To use the machine, press
the <Energy Save> button. The <Energy Save> button goes out to indicate that the Sleep mode is exited.
1.3.1
The following describes how to enter the Energy Saver mode.
Specify a longer time period in [From Last Operation to Sleep Mode] than in [From Last Operation to Low Power

Note
Mode] under [Energy Saver Timers]. For information on how to set the duration for [Energy Saver Timers], refer to
"Energy Saver Timers" (p. 290).
Steps
St
1.
Press the <Energy Save> button on the control panel.
Note

1.3 Energy Saver Mode

36

Energy Saver Mode

Entering the Energy Saver Mode

The machine may not immediately enter the

Energy Saver mode when you press the
<Energy Save> button depending on the
state of the machine. In this case, wait for a
while and then press the <Energy Save>
button.
Copy (Not In Use) Review
Services Home
ABC DEF
1 2 3
Clear All
Job Status
GHI JKL MNO
4 5 6
Interrupt
PQRS TUV WXYZ
7 8 9
Machine Status
0
＃
Dial Pause Speed Dial
C Start
<Energy Saver> button
Log In / Out
Energy Saver
Stop