Advanced Internet Access Setup - ZyXEL Communications P-660H-61 User Manual

Chapter 6 WAN Setup
Table 16 Network > WAN > Internet Access Setup (continued)
LABEL
WAN Identifier
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Connect on Demand
Max Idle Timeout
Apply
Cancel
Advanced Setup

6.2.1 Advanced Internet Access Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced Setup
button in the Internet Access Setup screen. The screen appears as shown.
Figure 29 Network > WAN > Internet Access Setup: Advanced Setup
98
DESCRIPTION
If you selected Manual, enter the WAN Identifier in this field. The WAN identifier
should be unique and 64 bits in hexadecimal form. Every 16 bit block should be
separated by a colon as in XXXX:XXXX:XXXX:XXXX where X is a hexadecimal
character. Blocks of zeros can be represented with double colons as in
XXXX:XXXX::XXXX.
Select Keep Alive when you want your connection up all the time. The ZyXEL Device
will try to bring up the connection automatically if it is disconnected.
Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select Connect on
Demand. The default setting is 0, which means the Internet session will not timeout.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced WAN Setup screen and edit more details of your
WAN setup.
ADSL Router Series User's Guide