Change Your Password; Saving Your Configuration - ZyXEL Communications MGS-3712/MES-3728 User Manual

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default
administrator password. Click Management > Access Control > Logins to
display the next screen.
Figure 19 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your
changes back to the run-time memory. Settings in the run-time memory are lost
when the Switch's power is turned off.
Click the Save link in the upper right hand corner of the web configurator to save
your configuration to nonvolatile memory. Nonvolatile memory refers to the
Switch's storage that remains even if the Switch's power is turned off.
Note: Use the Save link when you are done with a configuration session.
MES-3728 User's Guide
Chapter 4 The Web Configurator
53