Create An Ip-Based Vlan Example - ZyXEL Communications MGS-3712/MES-3728 User Manual

Chapter 9 VLAN
Table 19 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN Setup (continued)
LABEL
Add
Cancel
Index
Active
Port
Name
Ethernet
Type
VID
Priority
Delete
Cancel

9.10 Create an IP-based VLAN Example

This example shows you how to create an IP VLAN which includes ports 1, 4 and
8. Follow these steps:
Activate this protocol based VLAN.
1
Type the port number you want to include in this protocol based VLAN. Type 1.
2
Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
3
Select the protocol. Leave the default value IP.
4
Type the VLAN ID of an existing VLAN. In our example we already created a static
5
VLAN with an ID of 5. Type 5.
110
DESCRIPTION
Click Add to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
This is the index number identifying this protocol based VLAN. Click on any
of these numbers to edit an existing protocol based VLAN.
This field shows whether the protocol based VLAN is active or not.
This field shows which port belongs to this protocol based VLAN.
This field shows the name the protocol based VLAN.
This field shows which Ethernet protocol is part of this protocol based
VLAN.
This field shows the VLAN ID of the port.
This field shows the priority which is assigned to frames belonging to this
protocol based VLAN.
Click this to delete the protocol based VLANs which you marked for
deletion.
Click Cancel to begin configuring this screen afresh.
MES-3728 User's Guide