Viewing And Editing Policy Configuration - ZyXEL Communications MGS-3712/MES-3728 User Manual

Layer 2+ metro ethernet switch
Table of Contents

Advertisement

Table 50 Advanced Application > Policy Rule (continued)
LABEL
Outgoing
Metering
Out-of-profile
action
Add
Cancel
Clear

21.3 Viewing and Editing Policy Configuration

To view a summary of the classifier configuration, scroll down to the summary
table at the bottom of the Policy screen. To change the settings of a rule, click a
number in the Index field.
Figure 96 Advanced Application > Policy Rule: Summary Table
The following table describes the labels in this screen.
Table 51 Advanced Application > Policy Rule: Summary Table
LABEL
Index
Active
MES-3728 User's Guide
DESCRIPTION
Select Send the packet to the mirror port to send the packet to the
mirror port.
Select Send the packet to the egress port to send the packet to the
egress port.
Select Enable to activate bandwidth limitation on the traffic flow(s) then
set the actions to be taken on out-of-profile packets.
Select the action(s) to be performed for out-of-profile traffic.
Select Drop the packet to discard the out-of-profile traffic.
Select Change the DSCP value to replace the DSCP field with the value
specified in the Out of profile DSCP field.
Select Set Out-Drop Precedence to mark out-of-profile traffic and drop
it when network is congested.
Select Do not drop the matching frame previously marked for
dropping to queue the frames that are marked to be dropped.
Click Add to inset the entry to the summary table below and save your
changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are
done configuring.
Click Cancel to reset the fields back to your previous configuration.
Click Clear to set the above fields back to the factory defaults.
DESCRIPTION
This field displays the policy index number. Click an index number to edit the
policy.
This field displays Yes when policy is activated and No when is it
deactivated.
Chapter 21 Policy Rule
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mes-3728

Table of Contents