Uploading Firmware To A Cluster Member Switch - ZyXEL Communications MGS-3712/MES-3728 User Manual

Chapter 37 Cluster Management
configurator home page and the home page that you'd see if you accessed it
directly are different.
Figure 186 Cluster Management: Cluster Member Web Configurator Screen
example

37.2.1.1 Uploading Firmware to a Cluster Member Switch

You can use FTP to upload firmware to a cluster member switch through the
cluster manager switch as shown in the following example.
Figure 187 Example: Uploading Firmware to a Cluster Member Switch
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 Switch FTP version 1.0 ready at Thu Jan
User (192.168.0.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
226 File sent OK
ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.
ftp> bin
200 Type I OK
ftp> put 390BBD1.bin fw-00-a0-c5-01-23-46
200 Port command okay
150 Opening data connection for STOR fw-00-a0-c5-01-23-46
226 File received OK
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.
ftp>
336
example
group 3042210 Jul 01 12:00 ras
group 393216 Jul 01 12:00 config
group
group
1 00:58:46 1970
0 Jul 01 12:00 fw-00-a0-c5-01-23-46
0 Jul 01 12:00 config-00-a0-c5-01-23-46
MES-3728 User's Guide