Table of Contents
Advertisement
Table 66 Advanced Application > AAA > RADIUS Server Setup (continued)
LABEL
Shared Secret
Delete
Apply
Cancel
25.2.2 TACACS+ Server Setup
Use this screen to configure your TACACS+ server settings. See
page 222
for more information on TACACS+ servers. Click on the TACACS+
Server Setup link in the AAA screen to view the screen as shown.
Figure 118 Advanced Application > AAA > TACACS+ Server Setup
MES-3728 User's Guide
DESCRIPTION
Specify a password (up to 32 alphanumeric characters) as the key to be
shared between the external RADIUS accounting server and the Switch.
This key is not sent over the network. This key must be the same on the
external RADIUS accounting server and the Switch.
Check this box if you want to remove an existing RADIUS accounting
server entry from the Switch. This entry is deleted when you click Apply.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 25 AAA
Section 25.1.2 on
225
Advertisement
Table of Contents
Troubleshooting
