8.6 IP Setup
Use the IP Setup screen to configure the Switch IP address, default gateway
device, the default domain name server and the management VLAN ID. The
default gateway specifies the IP address of the default gateway (next hop) for
outgoing traffic.
8.6.1 Management IP Addresses
The Switch needs an IP address for it to be managed over the network. The
factory default in-band IP address is 192.168.1.1. The subnet mask specifies the
network number portion of an IP address. The factory default subnet mask is
255.255.255.0.
You can configure up to 64 IP addresses which are used to access and manage the
Switch from the ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first.
Figure 43 Basic Setting > IP Setup
MES-3728 User's Guide
Chapter 8 Basic Setting
87