System Information; Event Buffer - Interlogix Concord 4 User Manual

• Chime. Press once to turn chime on, press again to turn chime off.
• Stay. Press once to arm to Level 2 (stay).
• Exit. Press once to use the quick exit feature.
• Away. Press once to arm to Level 3 (away).
Macro keys should not be programmed to disarm the system.
Note:
Your installer can also program these keys to perform a system command
different from those described. For example, instead of entering the command 2,
code, 4, 6 (arm to Level 2 with no delay and latchkey), your installer can program
one of the macro keys to perform the task with just one press. Check with your
installer for more information.

System information

There is information about your system that is useful to know. This includes the
factory code, the system number, the system level, and software version.
After identifying the information for your system, make a note of it in the "System
features" on page 78.
To identify system information:
1. Enter the programming menus by pressing 9, system or partition master
code.
2. Press 010. The first information displayed is the factory code.
For example, F nnn – nnn or FACTORY CODE nnn*nnnn.
3. Press B to display the system number.
For example, N – nnnnnnnn or SYSTEM NUMBER nnnnnnnn.
4. Press B to display the system level.
For example, L, nnnn or SYSTEM LEVEL nnnn.
5. Press B to display the software version.
For example, P nnnn or SW VERSION nnnnx.
6. Press *, 00, # to exit the programming menus.

Event buffer

You have the option to view the event history for each partition of your system.
These events include arming, disarming, tampers, programming entries, and
more.
Concord 4 User Manual 47