Interlogix Concord 4 User Manual page 61

Remote phone access. Dial the phone number and then press #, code, #, 9
code.
Touchpad. Press 9, code.
2. Enter a programming command sequence (see Table 12 below.)
Table 12: Programming shortcuts command sequences
Command
Time
Date
Regular user codes
Partition master code
System master code
Direct bypassing attribute
Remote access attribute
System test attribute
Latchkey report attribute
Partition assign attribute
(Concord 4 systems only)
Downloading
Touchpad brightness
Volume
Concord 4 User Manual
Programming sequence
*, 020, TTTT, #
*, 021, DDMMYY, #
Concord 4 (continues up to User 229):
User 00: *, 03000000, nnnn, #
User 01: *. 03000010. nnnn. #
User 02: *, 03000020, nnnn, #
Concord Express V4 (continues up to User 15)
User 00: *, 0300000, nnnn, #
User 01: *, 0300001, nnnn, #
User 02: *, 0300002, nnnn, #
If using alphanumeric or fixed display touchpads, use A or B to
scroll through the code attributes and change them as required.
Keypad must be in the partition to access the partition master code.
Partition 1: *, 0310, nnnn, #
Partition 2: *, 0311, nnnn, #
Partition 3: *, 0312, nnnn, #
Partition 4: *, 0313, nnnn, #
Partition 5: *, 0314, nnnn, #
*, 0320, nnnn, #
*, 030 nnn (user number) 1, 1 (off) or 2 (on), #
*, 030, nnn (user number) 2, 1 (off) or 2 (on), #
*, 030, nn (user number) 2, 1 (off) or 2 (on), # (Concord Express
V4)
*, 030, nnn (user number) 3, 1 (off) or 2 (on), #
*, 030, nn (user number) 3, 1 (off) or 2 (on), # (Concord Express
V4)
*, 030, nnn (user number) 4, 1 (off) or 2 (on), #
*, 030, nn (user number) 4, 1 (off) or 2 (on), # (Concord Express
V4)
*, 030, nnn (user number) 5, 1 to 6, #
*, 041, 1 (off) or 2 (on), #
*, 043, 0 to 3, #
*, 044, 0 to 7, #
Note: Only available with PIVM or VOM installed.
59