Latchkey Paging - Interlogix Concord 4 User Manual

• Closing reports. The page reports the arming level as 222 (Level 2 – Stay)
or 333 (Level 3 – Away), and the user that armed to that level. See "Pager
notification" on page 30 for more information.

Latchkey paging

The latchkey paging feature allows programmed pager holders to be notified
when the system is armed and/or disarmed during specific hours or under certain
conditions. For example, you could program the latchkey feature to page you if
your child doesn't arrive home and disarm the system (using a code with the
latchkey attribute) by the programmed latchkey time.
You can set up the latchkey-paging feature to send a page in the following
situations.
• Send a page when the system is disarmed (latchkey opening).
• Send a page when the system is armed (latchkey closing).
Your system can call up to five different pager numbers to report a latchkey
opening/or closing. Latchkey pages do not report to the central station. See
"Paging" on page 80 to see which pagers have been set up to receive a page for
this feature. Contact the installer if you would like to turn latchkey paging on or off
for any programmed pager.
Only latchkey-designated users can cause a latchkey page to be sent. By
default, this includes the first six regular user codes. If you would like to include a
keychain touchpad as a latchkey user, contact your installer. Any regular user
code can be programmed with this attribute. See "Assigning code attributes" on
page 25.
The reports include:
• Latchkey opening reports. The page reports the arming level as 111 (Level
1 – Off) and the user.
• Latchkey closing reports. The page reports the arming level as 222 (Level 2
– Stay) or 333 (Level 3 – Away), and the user that armed to that level.
The installer can set up latchkey opening for one of two types of use, basic and
advanced.
Basic latchkey opening
If your system is set up for basic latchkey, you can send a latchkey-opening page
based on a time schedule or based on the latchkey modifier 6.
To send a latchkey-opening page based on time schedule only:
1. Assign the latchkey opening feature a time schedule. (This needs to be done
only once.)
38 Concord 4 User Manual