TracVision M5/M7 User's Guide
Chapter 3 - Settings
Dual-Sat or Single Satellite Setups
46
The following instructions explain how to configure the TracVision
system to track one or two satellites of your choice from the antenna's
satellite library. For operation instructions, refer to "Operation" on
page 11.
IMPORTANT!
Be sure to stop the vessel in a blockage-free area before
performing this procedure. Excessive motion or satellite
blockage can prevent proper configuration.
NOTE: Be sure to only install satellites that your TracVision M5/M7 system
can track in your geographic location. For your convenience, KVH provides
links to several websites that offer satellite coverage information. Simply visit
our website at www.kvh.com/footprint.