KVH Industries TracVision M5 User Manual page 37

Determining the Skew Angle
Use the flowchart in Figure 3-2 to determine the skew angle of the
currently selected satellite using the ADCU.
NOTE: If you wish to determine the average skew for two or three satellites,
determine the skew angle for each satellite by performing the procedure below,
then divide by the number of installed satellites.
TIP: Sky Mexico subscribers can also refer to Figure 1-5 on page 10 for
approximate skew settings for the PAS-9 satellite.
Figure 3-2 Determining the Skew Angle Using the ADCU
<Default Display>
Setup display type?
Enter
Get antenna status?
Enter Next
Then select "Yes" to
confirm your selection.
Get system error?
Yes
Get skew angle?
Yes
Skew angle
Press any button to exit.
Menu
Next Return
Select Next
until "Get
antenna
status?" is
displayed.
Return
Next Return
Select Next
until "Get
skew angle?"
is displayed.
Next Return
##.#˚
TracVision M5/M7 User's Guide
Chapter 3 - Settings
35