KVH Industries TracVision M5 User Manual page 51

Step 2 - Configure the TracVision System
Now you need to configure the TracVision system to track your
selected satellites. Use the flowchart in Figure 3-17 to configure your
selected satellite(s).
TIP: For your convenience, you can determine your approximate latitude and
longitude using the Position Grids provided in Appendix F on page 111.
Figure 3-17 Dual-Sat or Single Satellite Setup
<Default Display>
Setup display type?
Enter
Control antenna?
Enter Next
Then select "Yes" to
confirm your selection.
Man control antenna?
Yes
Install satellite?
Yes
Install A <SAT NAME>
Yes
Select Next until the
desired satellite is
displayed, then select Yes.
Install B <SAT NAME>
Yes
Select Next until the
desired satellite is
displayed, then select Yes.
Menu
Next Return
Select Next
No GPS Installed
until "Control
antenna?"
is displayed.
Return
Next Return
Select Next
until "Install
satellite?"
is displayed.
Next Return
Next Cancel
Next Cancel
TracVision M5/M7 User's Guide
Installing sats
Please wait
<SAT NAME1> and
<SAT NAME2> installed
GPS Installed
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Latitude: ##N
- Enter +
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Longitude: ###E
- Enter +
Latitude: ##N
Longitude: ###E
Restart antenna?
Yes No
Chapter 3 - Settings
49