Changing Channels And Switching Between Satellites (Linear Versions) - KVH Industries TracVision M5 User Manual

Changing Channels and Switching Between Satellites
(Linear Versions)
During installation, your TracVision system should have been set up
to track the satellite(s) of your choice and the channel guides for your
selected satellite service should have been downloaded.
Since some channels might be located on another satellite, changing
channels might require switching between satellites. Switching
satellites occurs automatically with most TracVision system
configurations. However, if the TracVision system includes a
multiswitch, manual satellite switching is required.
NOTE: To enable automatic switching, the receiver must be properly
configured (see "Linear Receiver Configuration" on page 25 for more
information).
TracVision M5/M7 User's Guide
Chapter 2 - Operation
21