Directv Dual-Sat Mode Setup - KVH Industries TracVision R1ST User Manual

TracVision M5/M7 User's Guide
Chapter 3 - Settings

DIRECTV Dual-Sat Mode Setup

44
This section explains how to configure the TracVision system to track
the DIRECTV 101 and 119 satellites. Use the flowchart in Figure 3-19 to
configure the TracVision system for DIRECTV Dual-Sat Mode. For
operation instructions, refer to "Changing Channels and Switching
Between Satellites (Circular Versions)" on page 15.
NOTE: For your convenience, you can determine your approximate latitude
and longitude using the Position Grids provided in Appendix B on page 75.
Figure 3-19 Configuring DIRECTV Dual-Sat Mode
<Default Display>
Menu
Install Satellite? Install Satellite?
Yes Yes Next Return Next Return
Circular or Linear?
Cir Lin Cancel
Service= DIRECTV?
Yes Next Cancel
Mode= Dual-Sat?
Yes Next Cancel
IMPORTANT: Choose Auto for
setups with 1 or 2 receivers. Choose
Manual for setups with 3 or more
receivers.
Set Sat Switch Type
Auto Manual Cancel
Set Lat/Long?
Yes Next Return
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Latitude: ##N
- Enter +
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Longitude: ###E
- Enter +
Installing DTV sats
101 and 119
Restarting Antenna