KVH Industries TracVision M5 User Manual page 73

TracVision M5/M7 User's Guide
Appendix A - Advanced Settings and Functions
74
Use the flowchart in Figure A-1 to modify the sine/cosine data output
settings, or restore the original sine/cosine settings.
NOTE: If an active GPS connection is not detected, "Only Mag Available" is
displayed. If the ADCU is receiving data from an external gyro, all compass
outputs are automatically configured as True North, causing "Only True
Available" to be displayed.
Figure A-1 Sine/Cosine Data Output Settings
<Default Display>
Menu
Setup display type?
Enter Next Return
Setup data outputs?
Enter Next Return
Then select "Yes" to
confirm your selection.
Set sine-cos levels?
Yes Next Return
Select magnetic or
true as required, then
select Enter.
Sine cosine is: Mag
Mag Enter True
Set Ref: 2.50 V
- Enter +
Set Swing: +/- 1.67 V
- Enter +
Select - or +
as required,
then select
Enter.