TracVision M5/M7 User's Guide
Chapter 3 - Settings
Adjusting the Skew Angle
36
Once you have determined the proper skew angle, follow the steps
below to adjust the antenna's LNB skew angle.
To avoid bodily injury, be sure to turn off the antenna and
disconnect power to all wired components.
1. Using a Phillips-head screwdriver, remove the screws
securing the radome. Then remove the radome and set
it aside in a safe place.
2. Locate the LNB assembly on the back of the antenna
reflector (see Figure 3-3).
Figure 3-3 Location of LNB on Back of Antenna Reflector
Reflector
CAUTION
LNB
Assembly