KVH Industries TracVision M5 User Manual page 75

TracVision M5/M7 User's Guide
Appendix A - Advanced Settings and Functions
76
Use the flowchart in Figure A-2 to modify the serial output settings, or
if you wish to restore the original output settings.
Figure A-2 Serial Output Settings
<Default Display>
Menu
Setup display type?
Enter Next Return
Setup data outputs?
Enter Next Return
Then select "Yes" to
confirm your selection.
Set sine-cos levels?
Yes Next Return
Set serial outputs?
Yes Next Return
NMEA Configuration
Select output BWC?
Yes Next Cancel
Select Next to toggle
output types (BWC,
GGA, GLL, HDG, HDM,
HDT, VTG, and XTE) as
required, then select
Yes.
Setting selection
Please wait
Select output BWC?
Yes Next Cancel
Select Cancel to accept the
selection.
Select serial port 1
Yes Next Cancel
Select Next to toggle
ports as required, then
select Yes.
Serial port 1 config
Output Data:NMEA
Set speed: 10 Hz
- Enter +
Select - or +
as required,
then select
Enter.
Resetting outputs?
Yes No
Outputs erasing
Please Wait
Select output type
NMEA KVH Cetrek
Cetrek Configuration
Cetrek data is:
Mag Enter True
Select Mag or True, then
select Enter. This displays
only if a valid GPS
connection is detected.