KVH Industries TracVision M5 User Manual page 53

Gyrotrac configuration
Hide thumbs Also See for TracVision M5:
Table of Contents

Advertisement

6. Wait at least 15 minutes before proceeding. Disregard
messages on the TV stating the test is complete; you
must wait 15 minutes before proceeding.
IMPORTANT!
Please be patient. The Check Switch test takes approximately 15
minutes to complete. Disregard any messages on the TV stating
the test is complete; the antenna must perform additional
operations before proceeding.
7. After waiting 15 minutes, repeat Steps 3-5 to run a
second Check Switch test.
NOTE: Each Check Switch test takes approximately 15 minutes.
8. Verify the values on your TV match those required for
your selected configuration (see Figures 3-19 and
3-20). If your values do not match, turn off the antenna,
then turn it back on and repeat Steps 4-7.
Figure 3-19 DISH 500 Second Check Switch Results on TV Screen
1
Port
119
Satellite
Odd
Trans
Reception Verified
Status
SW42
Switch
Figure 3-20 ExpressVu Second Check Switch Results on TV Screen
1
Port
91
Satellite
Odd
Trans
Reception Verified
Status
SW21
Switch
9. Exit the menu and allow the receiver to download the
program guide.
NOTE: You do not need to perform this procedure again unless you add
another receiver or you reconfigure a receiver for home use.
TracVision M5/M7 User's Guide
1
2
2
119
110
110
Even
Odd
Even
1
2
2
91
82
82
Even
Odd
Even
Chapter 3 - Settings
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracvision m7

Table of Contents