Setting Sleep Mode - KVH Industries TracVision M5 User Manual

TracVision M5/M7 User's Guide
Chapter 3 - Settings

Setting Sleep Mode

56
When the vessel has come to a stop and holds its position for one
minute (e.g., at a dock), the antenna unit enters Sleep Mode, which
locks the antenna in place to conserve power. As soon as the vessel
moves beyond a 1° - 2° window or the signal level changes
significantly, Sleep Mode automatically turns off and the system
begins tracking the satellite again (or enters Search Mode to find the
satellite).
Use the flowchart in Figure 3-25 if you wish to disable Sleep Mode, or
if you wish to restore the original Sleep Mode setting.
Figure 3-25 Setting Sleep Mode On/Off
<Default Display>
Menu
Setup display type?
Enter Next Return
Select Next
until "Control
antenna?"
is displayed.
Control antenna?
Enter Next Return
Then select "Yes" to
confirm your selection.
Man control antenna?
Yes Next Return
Select Next
until "Set
sleep on/off?"
is displayed.
Set sleep on/off?
Yes Next Return
SLEEP mode: ON
On Enter Off
Select On or Off as required,
then select Enter.