Mp (Multi-Purpose) Tray Feeding; Feeding From The Mp Tray And Associated Settings - Kyocera FS-6900 User Manual

1.5.

MP (Multi-Purpose) Tray Feeding

The MP tray is incorporated in the front of the printer. It can be used in one of two modes:
the first mode or cassette mode.
First mode (automatic manual feeding):
If there is paper in the MP tray, paper is fed from the MP tray first even if another paper
source is selected. (Default factory setting)
Cassette mode:
In this mode, it is possible to continuously feed approximately 100 sheets (0.1 mm thick-
ness).
‹
In first mode, all printing is performed according at the paper feed timing given by
the custom paper size regardless of the MP tray size setting.
‹
Use the PT-3 face-up output tray (optional) for output of postcards, envelopes,
OHP film, and other thick media.

Feeding from the MP Tray and Associated Settings

1.
Taking hold of the front of the printer as
shown in the figure, open the MP tray by pull-
ing towards you.
2.
Withdraw the sub tray as shown in the figure.
1.5. MP (Multi-Purpose) Tray Feeding
Sub Tray
MP Tray
1-23