Kyocera FS-6900 User Manual page 94

2.14. KIR Level
2-40
Status Page
KIR Checking Lines
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
The KIR mode currently set is too strong. Set the KIR mode
toý2II. Try printing the test pattern again. If you still get
dark vertical stripes, adjust the print density cotrol to a
lighter setting. (See the Mode Select Menu at the end of this
manual)
White vertical stripes
The KIR mode currently set is too weak. Set the KIR mode toý
2Q. Try printing the test pattern again. If you still get white
vertical stripes, adjust the print density control to a darker
setting. (See the Mode Select Menu at the end of this manual)