Table of Contents
Advertisement
Introduction
Ozone concentration
The printer generates ozone gas (O
cause an unpleasant smell. To minimize concentration of ozone gas to less than 0.1 ppm, we
recommend you not to install the printer in a confined area where ventilation is blocked.
IMPORTANT SAFEGUARDS
1.
Read all of these instructions and save these instructions for later use.
2.
Unplug this product from the wall outlet before cleaning.
3.
Do not use this product near water.
4.
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
5.
Slots and openings in the cabinet and the back are provided for ventilation to ensure
reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
6.
This product is equipped with a 3-wire grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the purpose of the grounding-type
plug.
7.
Do not allow anything to rest on the power cord. Do not locate this product where per-
sons will walk on the cord.
8.
If an extension cord is used with this product, make sure that the total of the ampere
ratings on the products plugged into the extension cord do not exceed the extension
cord ampere rating.
9.
Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the product.
10.
Except as explained elsewhere in this manual, do not attempt to service this product
yourself. Removing covers may expose you to dangerous voltage points or other risks.
Refer all servicing in those compartments to service personnel.
vi
) which may concentrate in the place of installation and
3
Advertisement
Table of Contents
