5.4. Print Quality Problems
The image is smeared
Clean the charger wire
Open the printer's side cover. Pull the green main charger wire cleaning knob slowly in and
out a few times. See Section 4.2.
Faint or blurred printing
Check the control panel.
If the 7RQHUýORZý7.ðëíý&OHDQýSULQWHU message is displayed and the
indica-
tor is flashing, install a new toner kit. See Section 4.2.
Set the print density from the control panel to a higher level than the current setting. See
Section 2.11.
Try changing the paper thickness setting on the Mode Select Menu. See Section 2.3.
Check the Ecoprint setting.
See Section 2.15.
5-5