Kyocera FS-6900 User Manual page 8

11.
Unplug this product from the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
A —When the power cord or plug is damaged or frayed.
B— If liquid has been spilled into the product.
C— If the product has been exposed to rain or water.
D— If the product does not operate normally when the operating instructions are fol-
lowed. Adjust only those controls that are covered by the operating instructions
since improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal
operation.
E— If the product has been dropped or the cabinet has been damaged.
CE Marking Directive
according to Council Directive 89/336/EEC and 73/23/EEC
Manufacturer's name:
Manufacturer's address: 2-14-9 Tamagawadai, Setagaya Ward, Tokyo 158-8610, Japan
declares that the product
Product name:
Model number:
Conforms to the following product specifications.
The manufacturer and its merchandising companies retain the following technical docu-
mentation in anticipation of the inspection that may be conducted by the authorities con-
cerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
Kyocera Corporation, Printer Division
Page Printer
FS-6900 (as tested with enhancement optional units: PF-26,
DU-25, etc.)
EN 55 022:1998 Class B
EN 61 000-3-2:1995
EN 50 082-1:1992
IEC 801-2:1991
IEC 801-3:1984
IEC 801-4:1988
EN 60 950-1:1992 (+A1+A2+A3+A4+A11)
EN 60 825-1:1994+A11
Introduction
vii