Table of Contents
Advertisement
2.2. Operating Procedures
Status Printout
It is possible to print out and check the printer's current status including unit emulation,
font, and memory usage.
Check that the ON LINE indicator lit and that the messageý 5HDG\ is displayed in the
1.
message display.
2.
Press the STATUS key. The message display will readý3URFHVVLQJ, and a status
page will be printed. After it is finished printing, the message display will return toý
5HDG\.
An example of a printed status page is shown on the next page. Note that information on an
actual status page may differ slightly from this example.
You can output a status page showing the printer settings in more detail as follows.
1.
Press the MODE key to enter Mode Selection mode.
2.
Press the + or - key repeatedly until the message display indicatesý2WKHUVý!.
3.
key and then press the + or - key repeatedly until the message display indi-
Press the
catesý!6HUYLFHý!.
4.
Press the
key and the message display indicates as follows:
!!3ULQW
ý ý 6WDWXVý SDJH
5.
Press the ENTER key.
6.
Whený" appears on the message display, press the ENTER key again.
The printer begins printing out the status page.
2-10
Advertisement
Table of Contents
