Kyocera FS-6900 User Manual page 66

2.2. Operating Procedures
1 — Software version
This information shows the software version and date of issue of the printer.
2 — Hardware information
This information shows the currently selected paper feed source (indicated by an asterisk),
paper size, and main settings of the printer.
3 — Page information
This information shows the currently selected resolution and number of copies.
4 — Memory usage
This information shows the amount of total memory installed in the printer and the amount
of currently available memory.
5 — Installation Options
This shows the options currently installed in the printer.
6 — Emulation
This shows all available emulations and the currently selected emulation (marked with an
asterisk). The printer is shipped from the factory set to PCL 6 emulation.
7 — Interface information
This information shows all interfaces installed in the printer and the currently selected
interface.
8 — Fonts at startup (for each interface)
This shows the font automatically selected when the printer starts up (default font). It is
possible to set different fonts for the parallel interface and the serial interface. The figure
on page 2-11 shows default settings. The font is set to "1" (Courier bitmap font).
This also shows font information similar to the column below if an optional interface is
installed.
9 — KIR test pattern
This is used when setting the printer's KIR mode. For details, see page 2-39.
2-12