Loading Paper In The Multi Purpose Tray - Kyocera ECOSYS P4140dn Operation Manual

Preparation before Use > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
2
m ).
For details of the supported paper sizes, refer to the following:
Choosing the Appropriate Paper (page 11-12)
For the paper type setting, refer to the following:
Media Type Setting (page 8-8)
Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT
• If you are using a paper weight of 106 g/m
paper you are using.
• Remove each transparency from the top tray as it is printed. Leaving transparencies in the top tray may
cause a paper jam.
The capacity of the multi purpose tray is as follows.
2
• Plain paper (80 g/m
• A3 plain paper (80 g/m
• Thick paper (106 to 220 g/m
• A4 thick paper (104.7 g/m
• A3 thick paper (104.7 g/m
• Hagaki (Cardstock): 1 sheets
Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2: 
•
5 sheets
NOTE
• When you load custom size paper, enter the paper size by referring to the following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-14)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-14)
1
), recycled paper or color paper: 100 sheets
2
): 50 sheets
2
): 5 sheets
2
): 50 sheets
2
): 10 sheets
Open the multi purpose tray.
2
2
or more, set the media type to Thick and set the weight of the
3-8
) and up to 50 sheets of A3 plain paper (80 g/