Troubleshooting; Preventative Maintenance - Muratec F-110 Field Engineering Manual

5. Troubleshooting

5-1 Preventative Maintenance

The cycle period outlined below is a general guideline for maintenance. The example list is for an average usage of 50 trans-
mitted and received documents per day.
Environmental conditions and actual use will vary these factors. The cycle period given below is for reference only.
COMPONENT
ADF Rubber
ADF Roller
SCANNER
White Roller
CIS
Cartridge
Pickup Roller
Feed Roller
PRINTER
Transfer Roller
Fuser
5-2 Tech Mode
In Tech mode, the technician can perform various tests to isolate the causes of a malfunction, and set the technical option fea-
tures to customize the machine depending on the user's operation environment.
To access TECH mode
: Press SETUP, #, 1, 9, 3, 4 in sequence, and the LCD displays 'TECH' in the standby mode screen. While in TECH mode,
the machine still performs all normal operations.
To return to the normal user mode
: Turn the power off, then back on.
The technical options you have set in TECH mode are not changed unless you clear the machine's memory in TECH mode.
To communicate via direct connection with another fax machine, press OHD/V.REQ followed by Start/Enter.
• Caution :
When you finish operating in Tech Mode, you must turn the power Off/On.
CLEANING CYCLE
6 Months
1 Year
As Needed
As Needed
REPLACEMENT CYCLE
10,000 Pages
20,000 Pages
10,000 Pages
2,500 Pages
60,000 Pages
50,000 Pages
60,000 Pages
50,000 Pages
SOLUTION
5-1